FLASH LEAGUE / DRAFT EXHIBITION

Physics Soccer Official Rule Book

Spectator explanation

Move, bump and kick one ball into an opposing goal. Each credited goal scores one. Most goals after three rounds wins.

Positions, zones and kickoffs

Draft 3 assigns fixed formation slots from complete explicit per-entry positions or the frozen lineup order. One player is a whole-field rover. Two use keeper and rover. Three use keeper plus two overlapping full-length wing halves. Four use keeper plus three overlapping full-width depth bands. Five use keeper plus four whole-field quadrants. Six add central cover to the four quadrants. Both teams occupy every quadrant; they are not restricted to their own half. All physical capabilities remain equal.

Zone responsibility

Each position has a fixed rectangular responsibility zone relative to its own goal. All authored profiles steer to targets inside their zone, with an interior braking margin. A robot pushed outside by contact returns to its zone; there are no invisible walls, teleports or zone fouls. Only teammates who can reach the ball from their zone compete to apply ball pressure. Others hold role positions, with the goalkeeper tracking laterally in the goal area. Kick reach permits playing an adjacent ball without leaving the zone.

Starting formation and rotations

Initial entrants start at published homes. After goals or dead balls, players walk from their current locations to those homes at up to 80 units per tick; they do not teleport. The ball returns to center after the goal replay. During this ceremonial walk, competitive contacts and kicks are disabled. Only when every robot has reached its home does the shared three-second countdown begin. Round transitions rotate homes and zones with goals and walk the players to the new assignments. The competition clock advances only during active play.

Zone presets

Coordinates are goal-relative and rotate with each team. The four quadrant zones span depth and lateral intervals 0–0.55 or 0.45–1, giving a 10%-wide shared strip around each center line. Physical radius clearance applies at field walls. Quadrant homes are at local depths 0.19 or 0.69, lanes 0.25 or 0.75, separating opposing lineups. The central cover zone is 0.35–0.65 on both axes, home (0.40, 0.50). Keepers cover depth 0–0.26, lateral 0.25–0.75. Three-player wing zones cover the full field length and overlapping lateral halves. Four-player outfield bands cover the full field in thirds with 0.05 overlap beyond their shared edges. Other players cover and receive inside their own responsibility areas.

Directional passing and receiving

Kicks still use sixteen directions with the same fixed impulse and cooldown. The authored controller looks for a clear shot within 18 world units; otherwise it can pass to a teammate assigned to another zone. It leads the receiver by up to twenty simulation ticks of visible movement, constrains the target to the receiver zone, checks the actual outgoing direction after adding the kick impulse to the current ball velocity, and rejects occupied lanes. Pass candidates are at most eighteen world units away. Receivers anticipate the visible incoming ball inside their zones. A pass is an ordinary physical kick: opponents can intercept it, there is no possession lock, and passes award no points. Blocked attackers move laterally and seek a clear outlet rather than endlessly pushing into one another.

Movement and physics

Eight movement directions or stop, with sixteen optional kick directions. Integer positions use 1000 units per world unit. Simulation runs at 60 Hz, with four fixed substeps and two simultaneous-delta contact iterations per substep. Robot radius is 1000, ball radius 600. Equal robot mass is four times ball mass. Robot speed is capped at 100 units per tick; ball speed at 300. Acceleration, damping, restitution, tolerances and caps are pinned in the rule source. Robots collide with each other and walls. No fouls, offside, spin control, health or upgrades.

Kicks and simultaneous contact

A kick requires the ball center within 2000 units and an available 60-tick cooldown. It adds 200 units per tick along the chosen aim. Sum simultaneous kicks before clamping ball speed. Resolve body contact deltas from the same iteration snapshot. Qualifying contacts retain a bounded attribution history. An exactly simultaneous attacking touch by several teams remains uncredited in four-team play unless a later touch resolves attribution; do not award by array order.

Goals and restarts

The whole ball must cross a goal plane inside the mouth. Two-team goals award the opponent, including own goals. Four-team goals award the most recent uniquely eligible touching team other than the conceding side; defending touches preserve prior attacking credit. Individual credit requires a unique qualifying member. After a goal, preserve the goal frame for one second, replay up to the preceding three seconds at half speed using recorded states, then walk back, wait for every entrant, and count down 3–2–1. The round clock pauses for this entire sequence. A final-tick goal receives its replay before round closure, without another kickoff. A stationary ball restarts after five seconds in a one-diameter window following the first touch; dead balls use the same walk and countdown without a goal replay.

Layouts

Two-team fields are 60 by 40, 90 by 60 or 120 by 80 world units. Four-team fields are square: 48 by 48, 72 by 72 or 96 by 96, with one equal goal on each edge. Small supports up to four robots, medium six to twelve and large sixteen to twenty-four. Goal half-widths are 4, 6 or 8 world units. Arena presets are frozen before play.

Formats and competition

Exactly two or four teams field one to six active members each, with no bench rotation. Four-team arenas are square, with symmetric starts and equally sized goals or bases. Positions rotate between rounds; three rounds cannot give four teams every edge. Balance assignments across fixtures. Physical capabilities and computation limits are equal.

Match and ties

Three five-minute active-play rounds are always played. Total goals determine shared placements with no overtime. Intro and closing last 45 seconds each, with two 60-second breaks. Practice uses three one-minute active-play rounds, ten-second breaks and five-second intro/closing. Total wall time varies with goal replays, walks and countdowns, all excluded from the competition clock. The coordinator waits for actual completion; soccer cannot be placed in a rundown requiring a guaranteed hard end. Final-tick outcomes score before closure. Retain match totals across rounds.

Identity and controllers

Elixir supplies the selected entrant IDs, names, numbers, colors and approved artwork. Production controllers are authored deterministic programs; no live model calls or biography-derived traits. Match configuration pins controllers, rules, solver, arena, objective setup where applicable, seed and asset references. Invalid output becomes a recorded fault and neutral action.

Interruption and reproduction

Host timing interruptions, engine mismatches and uncertain recovery hold competition. Aborts produce no official result. Preserve configurations, original source and dependencies, runtime identity, journals and permitted inputs. The common analysis harness independently regenerates seeded runs; journal replay is explicitly recorded-action verification. Rendering, OBS, overlays, replay and the single stream mixer consume one presentation cursor and never decide results.

Release status

Draft exhibitions are not official league history, season awards or prediction settlement. Freeze rules only after scoped mechanical, reproduction, recovery, integrated Elixir exhibition and recorded capture checks, plus separate human spectator review.

Machine readable parameters

{
  "version": "draft-3",
  "status": "Draft",
  "hz": 60,
  "crashPoints": 0,
  "radius": 1000,
  "ballRadius": 600,
  "acceleration": 7,
  "robotSpeed": 100,
  "ballSpeed": 300,
  "kickImpulse": 200,
  "kickRange": 2000,
  "kickCooldown": 60,
  "restartTicks": 180,
  "stationaryTicks": 300,
  "substeps": 4,
  "solverIterations": 2,
  "robotDamping": 960,
  "ballDamping": 999,
  "restitution": 750,
  "rounds": 3,
  "zoneMargin": 800,
  "maxPassDistance": 18000,
  "passLeadTicks": 20,
  "maxPassMiss": 3500,
  "shotDistance": 18000,
  "formations": {
    "overlap": 0.05,
    "teamOffset": 0.06,
    "coverHalfWidth": 0.15,
    "coverHomeDepth": 0.4,
    "keeperDepth": 0.26,
    "keeperMinLane": 0.25,
    "keeperMaxLane": 0.75,
    "keeperHomeDepth": 0.08,
    "fourKeeperHomeDepth": 0.06,
    "roverHomeDepth": 0.38,
    "wingHomeDepth": 0.4,
    "bandHomeOffset": 0.04
  },
  "goalHoldTicks": 60,
  "replayLookbackTicks": 180,
  "replayRate": 0.5,
  "returnSpeed": 80
}