FLASH LEAGUE / DRAFT EXHIBITION

Physics Soccer Official Rule Book

Spectator explanation

Move, bump and kick one ball into an opposing goal. Each credited goal scores one. Most goals after three rounds wins.

Pitch presentation

White boundary and halfway lines, a center circle and spot, and goal/penalty boxes mark the pitch. Four-team fields use a symmetric cross through the center circle. Raised goal frames and open energy nets are decorative; goal scoring uses the published whole-ball crossing rule. Formation boundaries and home-position markers are not drawn. Player numbers remain visible. A steady gold ring marks the ball. A keeper starts a side dive before a wide shot arrives. The ball continues along its path until it contacts the glove. A standing keeper stops an incoming ball with its feet when it makes body contact, then has a brief settling window before distributing. A moving outfielder uses a feet-first slide for an accepted full-kick challenge with an opponent in ball reach. During the 75-tick slide the player cannot perform another ball action; during the following 32-tick recovery the player cannot voluntarily move or play the ball, although collisions may displace it. Cues and recovery use simulation time and are retained in replay.

Positions, zones and kickoffs

Draft 23 retains the fixed formation slots from complete explicit per-entry positions or the frozen lineup order. One player is a whole-field rover. Two use keeper and rover. Three use keeper plus two overlapping full-length wing halves. Four use keeper plus three overlapping full-width depth bands. Five use keeper plus four whole-field quadrants. Six add a free-roaming central striker to the four quadrants. Both teams occupy every quadrant; they are not restricted to their own half. Base movement/contact capabilities remain equal; every assigned goalkeeper has the published stronger full-kick distribution.

Zone responsibility

Keepers and quadrant players have fixed rectangular responsibility zones relative to their own goals; the central striker and rover can use the whole pitch. All authored profiles steer to targets inside their zone, with an interior braking margin. A robot pushed outside by contact returns to its zone; there are no invisible walls, teleports or zone fouls. One team carrier is selected from physically reachable, in-zone teammates using unpadded zone reach. A controllable ball gives up to 600 units of selection preference; a qualifying touch within the preceding 90 ticks gives up to 500 units while within 3 units of the ball. Nearby supporting teammates offer separate passing lanes when their challenger closes on the ball. Passing targets keep at least 5.5 world units from the ball and two simultaneous outlets stay at least 6.5 units apart. Players brake into their ready positions and keep their last movement heading when they settle. Outfielders shift within their zones as possession changes. In possession they preserve width and look for separated forward and backward outlets when the lanes are open. During a named pass, they start moving toward the next receiving area. Out of possession, one eligible challenger approaches from the goal side, a nearby teammate can cover behind the press, and others recover into a narrower shape or screen forward passes. The goalkeeper covers angles near its own goal line and claims balls reachable from its current painted-box responsibility. For an incoming ball moving at least 75 units per tick whose damped path threatens its goal, the keeper predicts the crossing at its current depth and moves laterally along that line instead of advancing toward the shot. Returning from contact or into the active inner box remains physical. Kick reach permits playing an adjacent ball without leaving the zone. Off-ball defenders move onto the incoming ball-to-goal line when their goal is threatened, while an eligible teammate applies ball pressure. All outfielders, including rovers and attackers, steer outside every inner keeper rectangle with body clearance. Routes go around its exposed corners, including during the walk home. Contact can push a robot inside; it then physically exits. Nearby movement predicts twelve ticks of player motion, braking or steering around approaching bodies instead of driving into them. Before a carrier reaches an internal responsibility edge or reserved keeper box, teammates offer reachable pockets beyond that boundary. The carrier attempts a safe handoff; without an outlet it brakes outward momentum and shields along the edge using legal short touches, rather than releasing the ball. Whole-field rovers do not require a handoff at the field wall. Carriers check a 3.5-unit route ahead of the ball, including opponents’ kick reach, and anticipate closing bodies over 24 ticks. Physical movement follows the selected dribble bend. A controlled carrier without a safe route brakes instead of continuing straight into the blocker; loose-ball challenges still approach and contest.

Starting formation and rotations

Initial entrants start at published homes. After the one-second goal-frame hold, players begin walking from their current locations to their homes at up to 80 units per tick while the recorded replay is shown. The live ball returns to center underneath the historical replay. Players do not teleport. During this ceremonial walk, competitive contacts and kicks are disabled. The shared three-second countdown begins only after the replay has ended and every robot is home; any unfinished walk continues visibly afterward. Round transitions rotate homes and zones with goals and walk the players to the new assignments. The competition clock advances only during active play. Each member receives a seeded goal-relative home offset of up to 600 integer units on each axis. It remains inside the assigned zone and rotates with the formation; replay uses the same seed and member identity. New offsets are drawn deterministically for every goal kickoff, preventing identical opening sequences from repeating. Players walk to the revised homes; they never teleport.

Zone presets

Coordinates are goal-relative and rotate with each team. The four quadrant zones span depth and lateral intervals 0–0.55 or 0.45–1, giving a 10%-wide shared strip around each center line. Physical radius clearance applies at field walls. Quadrant homes are at local depths 0.19 or 0.69, lanes 0.25 or 0.75, separating opposing lineups. The central striker may roam the whole pitch with physical radius clearance, retaining home (0.40, 0.50) for kickoffs. Keepers start 2.4 world units from goal and use the painted outer box: depth min(12 world units, 20% of the shorter field side), width extending 5 world units beyond each post. When the ball enters the painted inner box (depth 4, width extending 1.5 beyond each post), their target area contracts to that inner box. Contact excursions return physically; no invisible boundaries apply. Three-player wing zones cover the full field length and overlapping lateral halves. Four-player outfield bands cover the full field in thirds with 0.05 overlap beyond their shared edges. Other players cover and receive inside their own responsibility areas.

Directional passing and receiving

Full kicks use sixty-four absolute world-space directions, selected toward the opposing goal or intended teammate independently of the player's facing. A clear shot within ten world units takes priority. An outfielder can shoot from up to one quarter of the pitch length measured to the center of the target goal. The controller also looks for a clear trajectory and a viable opening past the keeper on driven shots. A safe carry remains available when the only shot is speculative. The controller tests damped ball trajectories through the whole goal opening and visible player movement led by up to twenty ticks, then ranks openings by the goalkeeper’s reachable margin and opponent clearance, including the keeper’s projected momentum, acceleration and the ball’s flight time. This is a risk estimate, not a guaranteed goal. A current opening does not guarantee a goal against subsequent defensive movement. The controller compares a physical dribble into open ground with a pass to a better-positioned teammate. An open forward lane is worth taking when the receiver can get the ball sooner than the carrier could move it there. The controller evaluates rolling 1.5-world-unit movement, with forward and angled alternatives and at least 0.35 units of goalward progress. During a carry, the player follows the rolling ball and uses legal short touches as the touch cooldown permits. The ball stays physically challengeable. Pass selection compares the predicted flight time, field position, lane clearance, receiver availability and the time opponents have to close. The controller favors an open nearby teammate, can use a shorter sideways or backward pass under pressure, and uses a firmer kick when distance or closing opponents require it. It leads visible teammate movement by up to twenty ticks. Pass targets stay within the teammate's zone and passes are at most 22.5 world units. Kicks remain physically interceptable. A teammate receiving from the goalward side can direct a short touch through its own feet for up to 48 ticks. Other bodies remain solid and any other player's accepted contact cancels the receiving window. Within 2.6 world units of the ball, a receiving outfielder reversing direction slows its opposing momentum with the existing brake rate. It can turn after the ball has passed under its feet without increasing maximum movement speed. When the carrier has a blocked route, it can recycle possession through an open teammate behind the ball. The carrier can shield or carry if a pass offers little benefit. At a responsibility edge it can use its full unpadded legal reach to play the ball. When opponents converge on a slow ball or the ball is pinned near an arena wall, the bots select one nearby eligible outfielder based on readiness, distance, motion and a recent deliberate touch. The other players contain the play or make themselves available for a pass. The challenger looks for a shot or a named pass to an open teammate, then for a short touch it can follow out of pressure. A longer clearance considers which team can reach the ball next and avoids aiming into an empty boundary lane. A player can approach a stationary wall ball directly. The simulation accepts all legal strikes and contacts and does not reset an inactive ball.

Movement and physics

Eight movement directions or stop, with an optional full kick in one of sixty-four absolute directions or short control touch in one of sixteen absolute directions; one ball action per tick. Integer positions use 1000 units per world unit. Simulation runs at 60 Hz, with four fixed substeps and two simultaneous-delta contact iterations per substep. Robot radius is 1000, ball radius 600. Equal robot mass is four times ball mass. Base robot speed is capped at 100 units per tick. The unique closest robot within kick range receives a 10% speed-cap boost only while it belongs to the latest qualifying touch batch; there is no possession lock. Tied nearest robots receive no boost. The boosted cap is 110 units per tick; ball speed at 610. Acceleration, damping, restitution, tolerances and caps are pinned in the rule source. Robots collide with each other and walls. No fouls, offside, spin control, health or upgrades.

Kicks and simultaneous contact

Every outfielder receives the same automatic goal-shot power. Within shooting range, a kick whose unopposed, damped path can cross the opening uses 360 units per tick. Power rises to 500 beyond eighteen percent of pitch length and to 600 beyond twenty-two percent. A defender can still block the shot. A named outfield pass to an eligible outfield teammate can request 140, 220 or 300 units per tick. Outfield clearances use 240. Every assigned goalkeeper uses 420 for a full kick, with the standard cooldown, and considers teammates up to 65 world units away. Keeper distribution scores actual damped flight reach, recipient openness, crowding, interception risk and progress. An open player around or beyond halfway can outrank a nearby goalmouth group. With no suitable receiver, a safe wide clearance, including a nearer flank escape when needed, is preferred to feeding the central attacking crowd. This is a published role capability, not a hidden skill adjustment. There is no new button or protected shot. A full kick requires the ball center within 2000 units and an available cooldown. It redirects the ball at the legal requested pass speed, the default 240 units per tick, 360, 500 or 600 for a qualifying outfield goal shot or 420 for a goalkeeper full kick, along the selected world-space aim, absorbing the prior incoming trajectory, with a 60-tick cooldown. Facing and movement direction do not rotate that aim. A receiving control touch uses the same reach, redirects at 75 units per tick and has a 12-tick cooldown. A player cannot combine a full kick and touch in one action. All accepted simultaneous ball actions average their requested velocity vectors, then clamp ball speed once; there is no last-writer advantage. Subsequent physical contacts can block or deflect either action. Body contact deltas use the same iteration snapshot, and qualifying contacts retain bounded attribution history. An exactly simultaneous attacking touch by several teams remains uncredited in four-team play unless a later touch resolves attribution; do not award by array order. Against driven shots, keepers start in their normal stance and use a seeded reaction window before the projected intercept. A standard goal uses twelve to thirty-two ticks. Wider goals give the keeper extra time to read the shot and move laterally. A dive can secure the ball only on contact with the moving glove. A goalkeeper in its outer box can dive toward a predicted goal-bound shot beyond standing reach. A catch requires real contact between the low ball and the moving glove during the reachable part of the clip. After a catch the ball follows the glove and the keeper can release it late in the dive, within one second of contact. Other players cannot challenge a held ball. Teammates spread into side outlets inside their zones. An early release needs an uncrowded receiver at least eight units from opponents with risk below 0.2. By the release deadline the keeper chooses a receiver at least five units clear with at most one nearby body and risk below 0.6, or a wide flank clearance. During the first sixty ticks of a proposed release, reject receiving lanes an opponent could reach at its legal base speed plus its available kick reach (or physical body reach while its kick cooldown is unavailable). Do not assume an attacker keeps running in its old direction. Friendly body obstruction is also checked. If the route to halfway is unsafe, a nearer side exit with at least four units of inward progress and twelve units of lateral displacement (capped at a quarter of field span) is available. Such a side escape can outrank a distant nominally wide target whose first leg feeds the shooter. A clearance heavily penalizes immediate interception risk but still chooses a least-risk release when every exit is contested. The keeper retains the same sixty-tick full-kick cooldown; it is not granted instant repeat saves. This role-specific catch is the sole protected-possession exception.

Goals and restarts

The whole ball must cross a goal plane inside the mouth. Two-team goals award the opponent, including own goals. Four-team goals award the most recent uniquely eligible touching team other than the conceding side; defending touches preserve prior attacking credit. Individual credit requires a unique qualifying member. After a goal, preserve the goal frame for one second, replay up to the preceding three seconds at half speed using recorded states, while the live players walk back underneath it. Hold the replayed goal frame for two seconds before returning to normal coverage. During replay, a close-up follows the ball, nearby robots and goal mouth. A crowd cheer plays at the presented live goal and again when the replay reaches the goal, through the shared mixer. After replay, finish any remaining walk, wait for every entrant, and count down 3–2–1. The round clock pauses for this entire sequence. A final-tick goal receives its replay before round closure, without another kickoff. A stationary or contested ball remains in play indefinitely until a goal or the round ends. There is no inactivity reset, relocation, automatic impulse or dead-ball restart.

Layouts

Two-team fields are 60 by 40, 90 by 60 or 120 by 80 world units. Four-team fields are square: 48 by 48, 72 by 72 or 96 by 96, with one equal goal on each edge. Small supports up to four robots, medium six to twelve and large sixteen to twenty-four. Goal half-widths are 4, 6 or 8 world units. Arena presets are frozen before play.

Formats and competition

Exactly two or four teams field one to six active members each, with no bench rotation. Four-team arenas are square, with symmetric starts and equally sized goals or bases. Positions rotate between rounds; three rounds cannot give four teams every edge. Balance assignments across fixtures. Base movement/contact capabilities and computation limits are equal; goalkeeper full-kick strength and the bounded catch are published role exceptions.

Match and ties

Three ten-minute active-play rounds are always played. Total goals determine shared placements with no overtime. Intro and closing last 45 seconds each, with two 60-second breaks. Practice uses three five-minute active-play rounds, ten-second breaks and five-second intro/closing. Total wall time varies with goal replays, walks and countdowns, all excluded from the competition clock. The coordinator waits for actual completion; soccer cannot be placed in a rundown requiring a guaranteed hard end. Final-tick outcomes score before closure. Retain match totals across rounds.

Identity and controllers

Elixir supplies the selected entrant IDs, names, numbers, colors and approved artwork. Production controllers are authored deterministic programs; no live model calls or biography-derived traits. Match configuration pins controllers, rules, solver, arena, objective setup where applicable, seed and asset references. Invalid output becomes a recorded fault and neutral action. Supplied light, medium and heavy body frames reach the shared renderer unchanged; local example frames are snapshots of the website member builds. Frame size is cosmetic. Completed matches stop bot decisions and simulation ticks while the renderer continues the winning celebration. Near goal, compare a keeper-reachable current shot with low-risk passes that create a materially better teammate shot anywhere inside the published shot range, without a separate twelve-unit receiver cutoff. Preserve an already clear finish. Estimate the actual reception, legal keeper movement and interception, and the short control-touch delay when a receiver must turn through the ball. A setup needs risk at most 0.2 and at least 1.5 units of keeper-margin improvement over an existing shot. An improved but still saveable shot also needs normal forward passing progress; sideways/backward service needs a clear new shot and cannot retreat more than 1.5 units. An available finish is not required to be impossible for the keeper to save. The accepted full-kick input may name its teammate receiver as public coordination metadata. An uncontested accepted kick freezes that receiving pocket for at most three seconds. The receiver moves to it and receives carrier selection preference when in reach, rather than drifting toward its formation home or charging the central lane early. A first finish ends the intention; expiry, a kickoff or another player's interference cancels it. The intended receiver avoids an immediate pass back to the sender while this intention is active. The ball remains free: no speed, reach, cooldown or possession protection is granted. No new physical action button or hidden future knowledge is added. A carrier facing two opponents moving toward the ball may select an open low-risk teammate outlet, including a modest sideways or backward pass, before immediate tackle range. The normal line-of-flight and receiver checks still apply; this does not guarantee reception.

Interruption and reproduction

Host timing interruptions, engine mismatches and uncertain recovery hold competition. Aborts produce no official result. Preserve configurations, original source and dependencies, runtime identity, journals and permitted inputs. The common analysis harness independently regenerates seeded runs; journal replay is explicitly recorded-action verification. Rendering, OBS, overlays, replay and the single stream mixer consume one presentation cursor and never decide results.

Release status

Draft exhibitions are not official league history, season awards or prediction settlement. Freeze rules only after scoped mechanical, reproduction, recovery, integrated Elixir exhibition and recorded capture checks, plus separate human spectator review.

Machine readable parameters

{
  "version": "draft-23",
  "status": "Draft",
  "hz": 60,
  "crashPoints": 0,
  "radius": 1000,
  "ballRadius": 600,
  "acceleration": 7,
  "robotSpeed": 100,
  "ballSpeed": 610,
  "kickRange": 2000,
  "kickCooldown": 60,
  "restartTicks": 180,
  "substeps": 4,
  "solverIterations": 2,
  "robotDamping": 960,
  "ballDamping": 999,
  "restitution": 750,
  "rounds": 3,
  "zoneMargin": 800,
  "maxPassDistance": 22500,
  "passLeadTicks": 20,
  "maxPassMiss": 3500,
  "shotDistance": 30000,
  "maxShotFieldFraction": 0.25,
  "fastShotFieldFraction": 0.22,
  "longShotMinClearance": 1100,
  "longShotKeeperMargin": -6200,
  "keeperCommitTicks": 30,
  "keeperMinCommitTicks": 22,
  "drivenShotReadWindow": [
    12,
    32
  ],
  "keeperReadWidthPerTick": 400,
  "drivenShotFieldFraction": 0.18,
  "drivenShotSpeed": 500,
  "longShotSpeed": 600,
  "formations": {
    "overlap": 0.05,
    "teamOffset": 0.06,
    "coverHomeDepth": 0.4,
    "roverHomeDepth": 0.38,
    "wingHomeDepth": 0.4,
    "bandHomeOffset": 0.04,
    "homeJitter": 600,
    "keeperHomeDistance": 2400
  },
  "goalHoldTicks": 60,
  "replayLookbackTicks": 180,
  "replayRate": 0.5,
  "returnSpeed": 80,
  "roundSeconds": {
    "practice": 300,
    "standard": 600
  },
  "carrierSpeedMultiplier": 1100,
  "dribbleLookahead": 8000,
  "passAdvantage": 2500,
  "passInterceptionPenalty": 12000,
  "kickSpeed": 240,
  "touchSpeed": 75,
  "touchCooldown": 12,
  "kickDirections": 64,
  "goalHalfWidths": [
    4000,
    6000,
    8000
  ],
  "shotSpeed": 360,
  "goalBoxes": {
    "outerMaxDepth": 12000,
    "outerFieldFraction": 0.2,
    "outerSideMargin": 5000,
    "innerDepth": 4000,
    "innerSideMargin": 1500
  },
  "passMinProgress": 2500,
  "turnPressureDistance": 2500,
  "keeperShotMinSpeed": 75,
  "dribbleStep": 1500,
  "dribbleMinProgress": 350,
  "carrierStickiness": 500,
  "carrierControlPreference": 600,
  "clearanceThreatDistance": 2000,
  "keeperKickSpeed": 420,
  "keeperPassDistance": 65000,
  "receiveTurnTicks": 48,
  "keeperHoldTicks": 60,
  "preferredShotDistance": 10000,
  "keeperImmediateOpenDistance": 8000,
  "keeperReleaseOpenDistance": 5000,
  "handoffWarningDistance": 9000,
  "handoffDistance": 4200,
  "outfieldLookaheadTicks": 12,
  "outfieldBoxBuffer": 150,
  "setupShotMargin": 500,
  "setupShotImprovement": 1500,
  "setupPassMaxRisk": 0.2,
  "setupMaxBacktrack": 1500,
  "setupPassTicks": 180,
  "setupMinShotClearance": 300,
  "carrySafetyDistance": 3500,
  "carrierLookaheadTicks": 24,
  "replayEndHoldTicks": 120,
  "slideTicks": 75,
  "slideRecoveryTicks": 32,
  "robotBrakeDamping": 820,
  "readyPositionRadius": 650,
  "keeperGloveRadius": 220,
  "keeperDiveContactStart": 22,
  "keeperDiveContactEnd": 45,
  "keeperDiveReleaseStart": 68,
  "keeperDiveReleaseEnd": 73,
  "keeperFootSettleTicks": 10,
  "passSpeeds": [
    140,
    220,
    300
  ]
}