FLASH LEAGUE / DRAFT EXHIBITION

Physics Soccer Official Rule Book

Spectator explanation

Move, bump and kick one ball into an opposing goal. Each credited goal scores one. Most goals after three rounds wins.

Pitch presentation

White boundary and halfway lines, a center circle and spot, and goal/penalty boxes mark the pitch. Four-team fields use a symmetric cross through the center circle. Raised goal frames and mesh nets are decorative; goal scoring uses the published whole-ball crossing rule. Formation boundaries and home-position markers are not drawn. Player numbers remain visible.

Positions, zones and kickoffs

Draft 14 assigns fixed formation slots from complete explicit per-entry positions or the frozen lineup order. One player is a whole-field rover. Two use keeper and rover. Three use keeper plus two overlapping full-length wing halves. Four use keeper plus three overlapping full-width depth bands. Five use keeper plus four whole-field quadrants. Six add a free-roaming central striker to the four quadrants. Both teams occupy every quadrant; they are not restricted to their own half. Base movement/contact capabilities remain equal; every assigned goalkeeper has the published stronger full-kick distribution.

Zone responsibility

Keepers and quadrant players have fixed rectangular responsibility zones relative to their own goals; the central striker and rover can use the whole pitch. All authored profiles steer to targets inside their zone, with an interior braking margin. A robot pushed outside by contact returns to its zone; there are no invisible walls, teleports or zone fouls. One team carrier is selected from physically reachable, in-zone teammates using unpadded zone reach. A controllable ball gives up to 600 units of selection preference; a qualifying touch within the preceding 90 ticks gives up to 500 units while within 3 units of the ball. Nearby supporting teammates make room rather than also kicking. Others hold role positions, with the goalkeeper covering angles near its own goal line and claiming balls reachable from its current painted-box responsibility. For an incoming ball moving at least 75 units per tick whose damped path threatens its goal, the keeper predicts the crossing at its current depth and moves laterally along that line instead of advancing toward the shot. Returning from contact or into the active inner box remains physical. Kick reach permits playing an adjacent ball without leaving the zone. Off-ball defenders move onto the incoming ball-to-goal line when their goal is threatened, while an eligible teammate applies ball pressure.

Starting formation and rotations

Initial entrants start at published homes. After the one-second goal-frame hold, players begin walking from their current locations to their homes at up to 80 units per tick while the recorded replay is shown. The live ball returns to center underneath the historical replay. Players do not teleport. During this ceremonial walk, competitive contacts and kicks are disabled. The shared three-second countdown begins only after the replay has ended and every robot is home; any unfinished walk continues visibly afterward. Round transitions rotate homes and zones with goals and walk the players to the new assignments. The competition clock advances only during active play. Each member receives a seeded goal-relative home offset of up to 600 integer units on each axis. It remains inside the assigned zone and rotates with the formation; replay uses the same seed and member identity. New offsets are drawn deterministically for every goal kickoff, preventing identical opening sequences from repeating. Players walk to the revised homes; they never teleport.

Zone presets

Coordinates are goal-relative and rotate with each team. The four quadrant zones span depth and lateral intervals 0–0.55 or 0.45–1, giving a 10%-wide shared strip around each center line. Physical radius clearance applies at field walls. Quadrant homes are at local depths 0.19 or 0.69, lanes 0.25 or 0.75, separating opposing lineups. The central striker may roam the whole pitch with physical radius clearance, retaining home (0.40, 0.50) for kickoffs. Keepers start 2.4 world units from goal and use the painted outer box: depth min(12 world units, 20% of the shorter field side), width extending 5 world units beyond each post. When the ball enters the painted inner box (depth 4, width extending 1.5 beyond each post), their target area contracts to that inner box. Contact excursions return physically; no invisible boundaries apply. Three-player wing zones cover the full field length and overlapping lateral halves. Four-player outfield bands cover the full field in thirds with 0.05 overlap beyond their shared edges. Other players cover and receive inside their own responsibility areas.

Directional passing and receiving

Full kicks use sixty-four absolute world-space directions, selected toward the opposing goal or intended teammate independently of the player's facing. A clear shot within ten world units takes priority. With a safe carry available, a speculative longer shot yields to advancing the ball; a pressured player or one without a carry can still shoot from up to thirty units. The controller tests damped ball trajectories through the whole goal opening and visible player movement led by up to twenty ticks, then ranks openings by the goalkeeper’s reachable margin and opponent clearance, including the keeper’s projected momentum, acceleration and the ball’s flight time. This is a risk estimate, not a guaranteed goal. A current opening does not guarantee a goal against subsequent defensive movement. Otherwise the authored controller compares a physical dribble into open ground with a pass to a better-positioned teammate. A dribble advances through ordinary body contact and, when controlling a faster ball, the published short touch. Ordinary outfield carrying never attaches the ball or grants protected possession. The published receiving touch below briefly permits passage through the receiving player’s feet. The bot checks forward and angled routes inside its responsibility area. It evaluates rolling 1.5-world-unit body movement and the physical ball path with forward/angled alternatives, requiring at least 0.35 units of goalward progress. Eight units of projected attacking value is used only to compare carrying with passing, not as a required empty corridor. During a carry, short control touches steer the ball along the chosen route whenever the touch cooldown allows. Between touches, the carrier follows the current rolling ball with a short lead rather than walking past it toward a distant route point. The ball remains free and physically challengeable. Nearby teammates support one eligible carrier and make room rather than immediately returning a short pass or clearing the ball away. Without nearby pressure, a pass must gain at least 2.5 world units toward goal. The near-goal pass bonus applies only when the receiver newly enters shooting range, not when both players are already there. It keeps the ball when the carry is open and a pass offers insufficient extra attacking value. Pass scoring rewards progress and a receiving position near goal, while penalizing aim error, receiver pressure and interception risk from visible opponent positions and velocities. A defender in a passing lane is a penalty, not an absolute prohibition; riskier passes can still be attempted and physically intercepted. Teammates directly blocking the outlet are avoided. Receivers are led by up to twenty ticks, targets stay within the receiving player's responsibility area, and passes are at most eighteen world units. A receiver already on the goalward side can direct a short touch toward an opposing goal through its own feet for at most 48 ticks, then carry or shoot. The controlled ball stays physical and free; any other player’s accepted contact cancels this receiving window. Other bodies remain solid. Facing and incoming velocity do not redirect the authored goalward touch. Backward or sideways passes remain possible to escape genuine pressure. Passing and dribbling award no points. When neither is suitable, the carrier protects/repositions rather than automatically full-kicking. When two opponents are both within two units of a slow ball, one eligible player per side can poke it out of the challenge when no safe carry is available. The public pair geometry and seed select compatible lateral exit cones, so simultaneous legal strikes retain an escape component instead of cancelling. A clear goal shot still takes priority. The poke is a normal full kick with its existing cooldown, not a possession grant or automatic impulse. A true immediate challenge within 2 units or a pinned boundary ball can trigger an emergency clearance. Bots never reset an inactive ball. At a non-goal boundary contest, the designated clearer steps beside the outgoing inward lane before kicking; supporting players move aside. Opposing legal clearances can point inward together, rather than repeatedly canceling or striking the waiting bodies. This does not relocate or automatically move the ball. With a carry or receive-turn available, passing additionally requires at least eight units of progress, interception risk below 0.2 and a receiver at least five units from opponents. The recipient must be more open than the carrier by 1.5 units, escape immediate pressure, or provide at least twelve units of progress while eight units clear. The existing advantage comparison must also favor the pass. At a responsibility edge, the carrier may use its full unpadded legal reach to play the ball instead of stopping beyond kick range.

Movement and physics

Eight movement directions or stop, with an optional full kick in one of sixty-four absolute directions or short control touch in one of sixteen absolute directions; one ball action per tick. Integer positions use 1000 units per world unit. Simulation runs at 60 Hz, with four fixed substeps and two simultaneous-delta contact iterations per substep. Robot radius is 1000, ball radius 600. Equal robot mass is four times ball mass. Base robot speed is capped at 100 units per tick. The unique closest robot within kick range receives a 10% speed-cap boost only while it belongs to the latest qualifying touch batch; there is no possession lock. Tied nearest robots receive no boost. The boosted cap is 110 units per tick; ball speed at 420. Acceleration, damping, restitution, tolerances and caps are pinned in the rule source. Robots collide with each other and walls. No fouls, offside, spin control, health or upgrades.

Kicks and simultaneous contact

Every outfield entrant receives the same automatic goal-shot power: a full kick whose unopposed integer-damped trajectory at 360 units per tick crosses an opposing goal opening uses that speed, even when a defender can block it. Outfield passes/clearances use 240. Every assigned goalkeeper uses 420 for a full kick, with the same reach/cooldown, and considers teammates up to 65 world units away. Keeper distribution scores actual damped flight reach, recipient openness, crowding, interception risk and progress. An open player around or beyond halfway can outrank a nearby goalmouth group. With no suitable receiver, a safe wide clearance, including a nearer flank escape when needed, is preferred to feeding the central attacking crowd. This is a published role capability, not a hidden skill adjustment. Authored bots consider clear goal shots from up to 30 world units, compared with the earlier 18. There is no new button or protected shot. A full kick requires the ball center within 2000 units and an available cooldown. It redirects the ball at 240 units per tick, 360 for a qualifying outfield goal shot, or 420 for a goalkeeper full kick, along the selected world-space aim, absorbing the prior incoming trajectory, with a 60-tick cooldown. Facing and movement direction do not rotate that aim. A receiving control touch uses the same reach, redirects at 75 units per tick and has a 12-tick cooldown. A player cannot combine a full kick and touch in one action. All accepted simultaneous ball actions average their requested velocity vectors, then clamp ball speed once; there is no last-writer advantage. Subsequent physical contacts can block or deflect either action. Body contact deltas use the same iteration snapshot, and qualifying contacts retain bounded attribution history. An exactly simultaneous attacking touch by several teams remains uncredited in four-team play unless a later touch resolves attribution; do not award by array order. A goalkeeper inside its outer painted box can instead secure a ball within two units when its cooldown is ready. This is an exclusive goalkeeper action, never combined with a kick or touch. A unique uncontested catch holds the ball at its accepted offset relative to the keeper for at most sixty simulation ticks; the keeper brakes and may still be bumped by robot contacts. The held ball cannot be challenged during that bounded possession, which cannot be renewed while held or immediately recaught before the ball leaves reach. Teammates spread into side outlets inside their zones. An immediate release requires an uncrowded receiver at least eight units from opponents and risk below 0.2. Otherwise the keeper waits up to one second, then chooses a receiver at least five units clear with at most one nearby body and risk below 0.6, or a wide flank clearance. During the first sixty ticks of a proposed release, reject receiving lanes an opponent could reach at its legal base speed plus its available kick reach (or physical body reach while its kick cooldown is unavailable). Do not assume an attacker keeps running in its old direction. Friendly body obstruction is also checked. If the route to halfway is unsafe, a nearer side exit with at least four units of inward progress and twelve units of lateral displacement (capped at a quarter of field span) is available. Such a side escape can outrank a distant nominally wide target whose first leg feeds the shooter. A clearance heavily penalizes immediate interception risk but still chooses a least-risk release when every exit is contested. The keeper retains the same sixty-tick full-kick cooldown; it is not granted instant repeat saves. This role-specific catch is the sole protected-possession exception.

Goals and restarts

The whole ball must cross a goal plane inside the mouth. Two-team goals award the opponent, including own goals. Four-team goals award the most recent uniquely eligible touching team other than the conceding side; defending touches preserve prior attacking credit. Individual credit requires a unique qualifying member. After a goal, preserve the goal frame for one second, replay up to the preceding three seconds at half speed using recorded states, while the live players walk back underneath it. After replay, finish any remaining walk, wait for every entrant, and count down 3–2–1. The round clock pauses for this entire sequence. A final-tick goal receives its replay before round closure, without another kickoff. A stationary or contested ball remains in play indefinitely until a goal or the round ends. There is no inactivity reset, relocation, automatic impulse or dead-ball restart.

Layouts

Two-team fields are 60 by 40, 90 by 60 or 120 by 80 world units. Four-team fields are square: 48 by 48, 72 by 72 or 96 by 96, with one equal goal on each edge. Small supports up to four robots, medium six to twelve and large sixteen to twenty-four. Goal half-widths are 4, 6 or 8 world units. Arena presets are frozen before play.

Formats and competition

Exactly two or four teams field one to six active members each, with no bench rotation. Four-team arenas are square, with symmetric starts and equally sized goals or bases. Positions rotate between rounds; three rounds cannot give four teams every edge. Balance assignments across fixtures. Base movement/contact capabilities and computation limits are equal; goalkeeper full-kick strength and the bounded catch are published role exceptions.

Match and ties

Three ten-minute active-play rounds are always played. Total goals determine shared placements with no overtime. Intro and closing last 45 seconds each, with two 60-second breaks. Practice uses three five-minute active-play rounds, ten-second breaks and five-second intro/closing. Total wall time varies with goal replays, walks and countdowns, all excluded from the competition clock. The coordinator waits for actual completion; soccer cannot be placed in a rundown requiring a guaranteed hard end. Final-tick outcomes score before closure. Retain match totals across rounds.

Identity and controllers

Elixir supplies the selected entrant IDs, names, numbers, colors and approved artwork. Production controllers are authored deterministic programs; no live model calls or biography-derived traits. Match configuration pins controllers, rules, solver, arena, objective setup where applicable, seed and asset references. Invalid output becomes a recorded fault and neutral action. Supplied light, medium and heavy body frames reach the shared renderer unchanged; local example frames are snapshots of the website member builds. Frame size is cosmetic. Completed matches stop bot decisions and simulation ticks while the renderer continues the winning celebration.

Interruption and reproduction

Host timing interruptions, engine mismatches and uncertain recovery hold competition. Aborts produce no official result. Preserve configurations, original source and dependencies, runtime identity, journals and permitted inputs. The common analysis harness independently regenerates seeded runs; journal replay is explicitly recorded-action verification. Rendering, OBS, overlays, replay and the single stream mixer consume one presentation cursor and never decide results.

Release status

Draft exhibitions are not official league history, season awards or prediction settlement. Freeze rules only after scoped mechanical, reproduction, recovery, integrated Elixir exhibition and recorded capture checks, plus separate human spectator review.

Machine readable parameters

{
  "version": "draft-14",
  "status": "Draft",
  "hz": 60,
  "crashPoints": 0,
  "radius": 1000,
  "ballRadius": 600,
  "acceleration": 7,
  "robotSpeed": 100,
  "ballSpeed": 420,
  "kickRange": 2000,
  "kickCooldown": 60,
  "restartTicks": 180,
  "substeps": 4,
  "solverIterations": 2,
  "robotDamping": 960,
  "ballDamping": 999,
  "restitution": 750,
  "rounds": 3,
  "zoneMargin": 800,
  "maxPassDistance": 18000,
  "passLeadTicks": 20,
  "maxPassMiss": 3500,
  "shotDistance": 30000,
  "formations": {
    "overlap": 0.05,
    "teamOffset": 0.06,
    "coverHomeDepth": 0.4,
    "roverHomeDepth": 0.38,
    "wingHomeDepth": 0.4,
    "bandHomeOffset": 0.04,
    "homeJitter": 600,
    "keeperHomeDistance": 2400
  },
  "goalHoldTicks": 60,
  "replayLookbackTicks": 180,
  "replayRate": 0.5,
  "returnSpeed": 80,
  "roundSeconds": {
    "practice": 300,
    "standard": 600
  },
  "carrierSpeedMultiplier": 1100,
  "dribbleLookahead": 8000,
  "passAdvantage": 2500,
  "passInterceptionPenalty": 12000,
  "kickSpeed": 240,
  "touchSpeed": 75,
  "touchCooldown": 12,
  "kickDirections": 64,
  "goalHalfWidths": [
    4000,
    6000,
    8000
  ],
  "shotSpeed": 360,
  "goalBoxes": {
    "outerMaxDepth": 12000,
    "outerFieldFraction": 0.2,
    "outerSideMargin": 5000,
    "innerDepth": 4000,
    "innerSideMargin": 1500
  },
  "passMinProgress": 2500,
  "turnPressureDistance": 2500,
  "keeperShotMinSpeed": 75,
  "dribbleStep": 1500,
  "dribbleMinProgress": 350,
  "carrierStickiness": 500,
  "carrierControlPreference": 600,
  "clearanceThreatDistance": 2000,
  "keeperKickSpeed": 420,
  "keeperPassDistance": 65000,
  "receiveTurnTicks": 48,
  "keeperHoldTicks": 60,
  "preferredShotDistance": 10000,
  "keeperImmediateOpenDistance": 8000,
  "keeperReleaseOpenDistance": 5000
}